Hi
lti
HI
T-R
E 500-SD mortar
wi
th
r
ebar (as anchor)
Thes
e pages
are part of the Anchor
Fas
tening
Technology Manual is
s
ue September 2014
09 /
2014
534
Inje
ction preparation
Tightly attach new
Hilti mixing nozzle HIT-RE-M
to foil pack manifold
(snug
fit).
Do not modify the mixing
nozzle.
Observ
e
the
instruction for use of t
he
dispenser and the
mortar.
Check foil
pack holder for proper function.
Do not use damaged foil packs / ho
lders.
Insert foil pack into foil pack holder and put holder into HIT-dispenser.
The
foil pack opens
automatically as dispensing is initiated.
Discard initial
adhesiv
e.
Depending
on the
size
of t
he
foil pack an initial amount of
adhesiv
e
has to be
discarded.
Discard quantities are:
3 strokes for 330 ml foil pack,
4 strokes for 500 ml foil pack,
65 ml
for
1400 ml foil pack
≤
5°C.
Inje
ct adhesive
from the back of the borehole
without forming
air v
oids
Inject the adhesiv
e
starting at the back of the hole, slowly withdrawing
the
mixer with each trigger
pull.
Fill holes approximately
2/3 full It is required
that the annular
gap between
the anchor
and the concrete is
completely filled with
adhesiv
e
along
the
embedment length.
After injection is
completed, depressurize the dispenser
by
pressing the
release trigger.
T
his will
prevent
further adhesiv
e
discharge from the mixer.
Ov
erhead
installation and/or installation with embedment
depth h
ef
>
250mm.
For ov
erhead
installation the injection is
only possible with the aid
of
extensions
and piston
plugs
.
Assemble HIT-RE-M mixer,
extension(s)
and
appropriately
sized piston plug
(HIT-SZ).
Insert piston
plug to back of the
hole and inject adhesiv
e.
During injection the
piston plug will be naturally
extruded
out of the bore hole by the adhesive
pressure.
Setting the eleme
nt
Before use, v
erify
that
the element is
dry and free of oil and other
contaminant
s.
Mark and
set element to the required
embedment
depth untill working
time
t
work
has
elapsed.
For ov
erhead
installation use
piston
plugs
and fix
embedded
parts with
e.
g.
wedges
HIT-OHW
.
Loading the
anchor:
After required
curing time
t
cure
the anchor can be loaded.
The applied
installation
torque
shall not exceed given
T
max.
For detailed information
on
installation see instruction for use giv
en
with the package of the
product.
